Modeler: Tutorial/Deriving a Database Schema
In this lesson you will learn how to check the integrity of an information grammar and how to derive a database schema.
Checking the integrity of an information grammar
Preparation
1. Open the Run menu and select Settings.
2. Check Copy Active Diagrams and Step by Step and make sure the other settings are as shown below:
3. Click OK.
Note: Some CaseTalk versions didn't pick up the settings until restarted and the project is reopened.
Verify well-formedness
1. Click menu Run, Verify well-formednes.. Casetalk automatically performs a model Integrity Check. If the casetool encounters any errors the Integrity Check window will be opened so you can examine the error. If Integrity Check encounters only warnings, the Integrity Check window will not be opened.
2. After the Integrity Check, the result is visible below the diagram. You can change the window-size for a better view.
A detailed description of the checks can be found in appendix B.
Step-by-step grouping
Step by step grouping is hardly used in daily practice because of the large number of roles that are present in most models. The following steps are only for the purpose of education and understanding the grouping process using a small model.
1. Open the Run menu and select Transform
2. Casetalk automatically transforms the model. After a while, this window appears:
3. Click yes.
4. CaseTalk now shows this window:
Since there are two separate UC’s on role 14 and 15, CaseTalk has to decide how to group these roles, and it proposes to group role 14 into the fact type Student.
5. Click Yes.
Casetalk shows the next proposal. You can click Yes for each separate proposals, or click Yes to all to approve all following proposals. 6. Casetalk now shows a window to save your transformed model:
7. Save the transformed diagram as Apprenticeship.igd.
The project manager on the right now shows the grouped grammar and diagram:
For the purpose of this tutorial, we’re going to rerun the transformation with other settings, so delete the two files that you’ve just created:
8. Rightclick on lesson_glr.igg and choose Remove from project. Confirm with Yes and notice that the grouped diagram is also deleted.
Note: if the repository-window on the left has suddenly disappeared, double click on the green IG-icon on the projectmanager:
9. Save the project by selecting Save All from the File menu.
Setting grouping marks before grouping
1. Open the diagram.
2. Right click on the fact type Apprenticeship Assignment.
3. Choose Task, Edit from the pop up menu
4. Click on the Role button in the window that appears.
5. Select role 14 and set the grouping to Don’t group:
6. Repeat this for role 15.
By unchecking roles 14 and 15 you have indicated you do not want to group these roles.
7. Open the Run menu and select Settings. Make sure all options are set as displayed on the right.
Note: Do not check Step-by-step grouping. The Step-by-step grouping algorithm ignores the User Override property.
9. Open the Run menu and select Transform.
10. If this window appears, select YES:
11. Save the new diagram as Apprenticeship.igd.
The generated information grammar is not in Optimal Normal Form (ONF). This structure might be choosen if Assigned Apprenticeship is unknown for most of the students. (Grouping Assigned Apprenticeship then results in a Student table with too many NULL values in the Assigned Apprenticeship column).
12. Rightclick on the lesson_glr.igg in the project manager and choose Remove from project. Confirm with Yes and save the project by choosing Save All from the File menu.
Deriving a proposal
1. Open the Run menu and check Proposal.
The elements in the diagram will show with G, L and R indicators.
3. Uncheck the menu item Proposal to hide the indicators again.
Choosing a Primary Key
When ‘Automatic primary key selection’ is active and no primary UC is marked, Casetalk chooses a primary key based on the role with the lowest number. For instance, the fact type ‘Apprenticeship Assignment’ has two separate UC’s on role 14 and 15. So Casetalk chooses role 14. When this option is disabled, the user kan choose the primary key.
1. Reactivate the IG Model and select the Run >> Settings menu.
2. Disable the option Automatic Primary Key Selection, and click OK.
3. Open the menu Run and select Transform.
4. In the appearing Primary Key Editor you can select which uniqueness constraint should be taken as primary key.
5. In the left section a list of fact types with multiple uniqueness constraints is displayed. Below this list you will find a the list with the uniqueness constraints of the selected fact type. Each of the uniqueness constraints in this list can be checked. In the right section the selected fact type is displayed .
6. Choose UC 13 for Apprenticeship Preference, so that the primary key is created using roles 11.1, 11.2 and 12.
Reducing
1. Select the GLR window:
Make sure the options are set as displayed above.
2. Click Start...
3. Click Yes to reduce everything.
4. Open the File menu and select Close Project. Do not save the project.
Generating Table Documentation
Step 19
1. Open the Options menu and select Project, than activate the GLR tab:
2. Check the options Automatic Column Fix Generation and Automatic Primary Key Generation, then click Ok. Read the information box below for more information about the GLR options.
GLR Options:
Derive data types: If this options is selected the casetool will derive a datatype proposal during the GLR process. The casetool will generate Char and Numeric datatypes. If you have entered other datatypes they will not be affected by this option. If you have used Char and Numeric yourself and the casetool has detected labels exceeding the total and/or decimal length you have specified these attributes will be updated.
Clear Population: If this option is selected, all population will be removed during the GLR process.
Automatic Column Fix Generation: If this option is selected and column naming conflicts are discovered, conflicting columns will be made unique by adding a number as postfix.
Automatic Primary Key Generation: If this option is selected and fact types with multiple primary keys are discovered, this algorithm will choose the first uniqueness constraint not covering optional roles. If all uniqueness constraints cover optional roles (only for generalisations) then all uniqueness constraints will be made primary.
3. Open the Tasks menu and select GLR:
Make sure all options are set as displayed above.
4. Click Start...
The information grammar will now be grouped, lexicalized and reduced.
5. Click on 'Apprenticeship Preference' in the Repository.
6. Open the View menu and select Table Documentation:
A window will appear containing the table documentation for 'Apprenticeship Preference':
7. Keep the Table Documentation window open and select another fact type from the Repository window.
Note: The contents of the Table Documentation window will change automatically.
8. Close the Table Documentation window.
9. Open the File menu and select Save Project. If necessary save the diagram as 'lesson2.igd'.
You can print the table documentation by selection Print or Print All from it's the popup-menu.
Back: Constraints
Next: Using the plugin modules